Single-phase and three-phase input power
Impervious electromotor (waterproof, dustproof) with IP66 classification
Direct power transmission to the screw due to the presence of a gear motor in order to prevent wear of the screw end and energy loss
Body material made of steel (can be ordered as all-steel 304 upon customer request)
The difference between grade A and grade E industrial automatic pots
1- The thickness of the sheet used in automatic industrial grade A pots is more than that of automatic industrial grade E pots.
2- The material of the door hinge in grade A industrial automatic pots is all steel.
3- In industrial automatic pots, more appearances have been made and external volumes have been used instead of gas valves.
1- Significant reduction of manpower : In an industrial kitchen that benefits from automatic industrial pots, a skilled workforce is able to perform all the cooking steps with the least amount of time. Therefore, the concern of draining rice in automatic industrial pots has been completely solved, also the manpower has minimal contact with hot water and increases safety for personnel in the kitchen environment.
2- Observance of principles and health matters : cooking by steaming method in automatic industrial pots makes you have the maximum output from the volume of rice that is used. Cooking without even a drop of oil, and the absence of the rice sticking on the bottom of pot prevents risks and harm to the body, and you consume the healthiest food possible.
1- Much lower energy consumption than traditional cooking
2- Ergonomic appearance and use and significant reduction of risks in the kitchen environment
3- Fast, high-quality cooking in high volume and save rice consumption
Consider a busy industrial kitchen where a large number of employees are cooking rice and stew in the traditional way with pots and pans, so cooking food for these groups always becomes a big challenge, while you can cook with industrial pots and pans. Turn this challenge into an opportunity, with these pots you will do the best and fastest cooking by saving manpower and energy, and the safety of your work environment will be maintained.
One of the unique features of using industrial pots compared to the traditional method is to save rice consumption, which makes you get the maximum output from the amount of rice you use, and you don't need even a drop of oil to cook rice in this way. You can get a very high-quality result from cooking rice by steaming.
1- Mandatory standard in production, which is the distinguishing feature of KiTECH pots compared to the examples in the market
2- The use of very high quality and resistant and at the same time replaceable hinges, which increases the life of the rubber and the lid of the pots.
3- The use of clips made of steel, bronze, aluminum and fireproof Bakelite, which causes long-term resistance and prevents steam from escaping inside the pot and increases the life of the body and lid of the pot.
4- The use of 304 steel sheet in all parts of the pot makes it more resistant to rust and decay in the long term.
Capacity of industrial automatic pots
Industrial automatic pots are available in two sizes: 250 liters and 380 liters.
According to the needs of each set according to the daily cooking statistics, the size of 380 liters is suggested to the kitchens that have more than 500 cooking presses during the day. But for small restaurants and offices that have a lower number of cooking, the size of 250 liters is recommended.
The price of automatic industrial pots depends on several cases.
1- The thickness of the sheets used in automatic industrial pots is 1 mil to 2 mil
2- The heat source of the pots is a cast iron burner or flame.
However, the automatic industrial pots of KiTECH have a much lower price than the European models due to having a standard mark and being double-walled in rice models and three-walled in stew models.
Has a spare window
Steel guard on the device tray to maintain operator safety
Ability to open the body from the device and quickly assemble for easy washing
